To preserve battery power, set the Auto Off to 1 minute and keep camera power off when not in use. Actual results will vary depending on the camera settings and how you use the camera. Alkaline will only last for about 100 pictures. A more economical solution is the rechargeable Energizer NiMH AAA battery, which yields about 300 pictures per charge. Each set of Energizer Ultimate Lithium batteries should yield about 500 pictures. Slide the battery door towards the latch to lock in place.įor maximum battery performance, the SeaLife Mini II camera includes two Energizer Ultimate Lithium AAA batteries. This will cause an interference with the waterproof seal and the camera will leak.īattery door is closed and LOCKED before closing the waterproof door. Make sure to close and LOCK the battery door before closing the waterproof door.īattery door should NOT be open when closing the waterproof door. Important Update: Close and LOCK battery door before sealing camera or camera WILL LEAK! Make sure the O-ring is not twisted before installing it into the O-ring groove: This position will form a waterproof seal. O-ring is completely seated into the groove.
O-ring must be seated flat into the groove or camera will leak. For detailed information about inspecting and caring for the Mini II O-ring, please refer to pages 42 through 45 of the Mini II instruction manual. Always make sure O-ring is clean, undamaged and correctly positioned in its groove prior to closing the waterproof door. It may be possible for the O-ring to lift up and out of its groove or stick to the opened waterproof door.
The Mini II O-ring is made of a soft silicone material that makes a reliable waterproof seal when the waterproof door is closed. Make sure O-ring is correctly seated into the O-ring groove
We have revised the product specifications accordingly.īack to Index 3. We recently tested the S元30 and S元32 cameras with a variety of 16GB memory cards without encountering any problems. The original product specifications recommend using a SDHC memory card up to 8GB. Download the latest firmware here.īack to Index 2. There is no need to set the “BATTERY TYPE”, so that setting has been removed from the advanced menu. The new firmware further improves underwater color correction and accuracy of the battery power indicator (for Alkaline, NiMH rechargeable and Energizer Lithium batteries). New firmware V1.03T1 release update available now These tips and updates will help you avoid common mistakes and get better results.
It is based on the most frequent problems that customers may encounter when using their SeaLife Mini II underwater camera. The following information has been compiled by our engineering and technical service team.
0 kommentar(er)
